Rockwool Ablative Coated Batt 60mm x 600mm x 1200mm

£20.35 £16.96
In stock
Product Description

The Rockwool Ablative Coated Batt 60mm is a mineral wool insulation product that provides thermal, acoustic, and fire performance. This ablative fire batt has been pre-coated on both sides with a high-performance ablative coating to enhance fire resistance. 

Ablative Coated Batts are not intended for use as load-bearing seals. Where a load-bearing seal is required, Rockwool Firestop Compound should be considered. This product can be installed across a variety of applications.

Size: 60mm x 600mm x 1200mm

Alternative thickness: 50mm

We are happy to help with enquiries, stock availability or any technical help you require, however for security reasons we cannot take orders over the phone. So if you need to chat give us a call on 03301231761 or email us at [email protected].

What is Rockwool Ablative Coated Batt 60mm?

Rockwool Ablative Coated Batt 60mm not only protects against air leakage but also enhances acoustic and fire performance “ the stone wool slab prevents fire, heat, and smoke from moving through your building. In the event of a fire, the ablative coatings release water vapour to cool the surface.

Tests have shown that a single 50mm batt provides up to two hours of fire resistance integrity and insulation. Where four hours of integrity and insulation are required, the use of the 60mm Ablative Coated Batt is recommended.


Features and benefits of Rockwool Ablative Coated Batt 60mm:


  • Ease of installation “ it can be easily cut to the size and shape required to fit the aperture and penetrations.
  • Rockwool Acoustic Intumescent Sealant should be applied to all cut edges of the batt ensuring an even cover is achieved over the entire thickness of the batt. Some applications may require the use of the Firepro Glue to cut edges.
  • Excellent fire resistance from a single-thickness batt.
  • Durable “ a reliable and long-lasting insulation solution.
  • Tested for airtightness “ also providing the crucial benefits of a proven acoustic seal and preventing the passage of smoke.
  • Environmental “ as with all Rockwool products, the Ablative Coated Batt is made from a renewable and plentiful naturally occurring resource.
  • Rockwool insulation saves fuel costs and energy in use and relies on trapped air for its thermal properties.

Applications for Rockwool Ablative Coated Batt 60mm:


  • Masonry walls
  • Drywall systems
  • Concrete floors

It has been comprehensively tested as part of the Rockwool Firepro range of fire protection products and can be installed across a variety of services and substrates including solid walls and floors, flexible walls, multi-service penetrations, the head of a wall, blank seals, and face fixed applications as well as large framed service voids.


Find out more on Rockwool insulation and how it is made.

Data Sheet (1.13 MB)
Installation Guide (473.45 kB)
Data sheet (516.70 kB)
Customer Questions
What is the r value of this sheet in m2k/w?
The R Value of this product is 0.33 m²K/W. 
Did you find what you were looking for?
More Information
Supplier Part Number123096
Size600mm x 1200mm

Orders and Delivery

Free delivery if your order is over £300 ex VAT. Orders between £100 - £300 ex VAT will be subject to a delivery charge of £50 ex VAT. Please note, we are unable to accept orders less than £100 ex VAT

When ordering on line you can specify the date of delivery, however we would not be able to specify the time of delivery on that day.

• Please note that we have a number of large vehicles, including articulated vehicles that may be used for delivery. Please advise us in the comments on your order if access to the delivery address is limited.

• Due to insurance guidelines, delivery personnel are unable to enter private residences. Delivery will be as far as possible to the kerbside of the delivery address. The recipient of the products is responsible for any additional lifting once the delivery has been made. Please bear in mind that Insulation products can be bulky and / or heavy.

• The delivery driver will require a signature to confirm the goods have been received.

 † Unfortunately we, Insulation Express, cannot deliver to the Highlands & Islands of the UK. However we will be happy to deliver to a freight forwarding company on your behalf.


Returns and Refunds

In the unlikely event that you need to return an item, please contact our team on [email protected] within 14 days of accepting delivery of the item.

Restocking charges may apply. We will discuss this with you upon receipt of the cancellation request. Restocking charges will be applied where the products are no longer required AND NOT for goods returned because either defective or damaged.

We usually charge 30% of value (minimum £25.00).

Please note that we cannot accept returns on special orders. Special orders may consist of items sent via third party shipping companies or made to measure products. If you are unsure on whether or not your item is a special order, please contact us on [email protected] prior to placing the order.

Write Your Own Review
You're reviewing:Rockwool Ablative Coated Batt 60mm x 600mm x 1200mm

Free delivery on orders over £300! Terms and Conditions apply

For all your roofing needs

Check out our new website!

 Buy Power tools online