Gyproc Ten Wallboard 12.5mm x 1200mm x 2400mm TE

£21.10 £17.58
In stock
Product Description

Gyproc Wallboard TEN 12.5mm plasterboard meets the Part E requirements for residential buildings by reducing sound transmission through partitions. The board offers residents quieter, more peaceful spaces. This also means you won't need to carry out pre-completion sound testing, saving you time and money when demonstrating that the acoustics of your building meet regulations.

Size: 12.5mm x 1200mm x 2400mm

We are happy to help with enquiries, stock availability or any technical help you require, however for security reasons we cannot take orders over the phone. So if you need to chat give us a call on 03301231761 or email us at [email protected].

What is Gyproc Wallboard TEN 12.5mm Plasterboard? 

Gyproc Wallboard TEN 12.5mm plasterboard consists of an aerated gypsum core in between strong paper liners. It can be used to dryline internal surfaces and is certified by BES 6001, rated ‘Very Good’. 


This plasterboard lining provides good fire protection and is non-combustible when exposed to high temperatures. It has a thermal conductivity of 0.190W/mK.

Features and benefits of Gyproc Wallboard TEN 12.5mm Plasterboard: 

  • Thermal conductivity of 0.19 W/m.K
  • Blocks out noise with a dense core
  • Meets Part E and Robust Detail requirements
  • No need to carry out pre-completion sound testing
  • For all internal and separating partitions in housing

Applications for Gyproc Wallboard TEN 12.5mm Plasterboard: 

  • Partitions
  • Used to meet the guidance in the Building Regulations Approved Document E (transmission of sound) and Robust Details.

Installation of Gyproc Wallboard TEN 12.5mm Plasterboard

When looking to install the Gyproc 12.5mm plasterboard, there are some specific considerations to be made. 



The board can be cut with a plasterboard saw, or you can score the front face paper with a sharp knife, then snap it over a straightedge and cut the back face paper. If you need to cut holes for things like socket boxes, you can use a utility saw. 



The Gyproc Wallboard TEN 12.5mm plasterboard should be fixed with the decorative side facing outwards to create the desired finish. Fixings should be installed at least 13mm from cut edges and 10mm from bound edges. If at all possible, try to position cut edges at internal angles, and stagger horizontal and vertical joints between layers by at least 600mm. 



When the board has been fixed, we advise that you begin finishing it as soon as possible to limit any potential damage or UV degradation to the paper liner. The 12.5mm plasterboard can be finished using jointing systems that comply with EN13963, which includes other Gyproc products. 


Painting and wallpapering


After the finishing system is dry, you can begin decorating with the paint or wallpaper of your choosing, to give the board the desired aesthetic finish you require. 


Any repairs


If at any stage the 12.5mm 1200mm x 2400mm plasterboard becomes damaged, ensure that the board core isn’t shattered. Providing that it’s still intact, you can fill in the damaged area with a product such as Gyproc Easifill 60, then allow it to set and apply a second coat if you need to. Then when it’s dry, you can sand it to a finish before redecorating the repaired area. 


If the core is damaged, or there are broken edges or extensive damage, you may need professional advice to determine what the best course of action is. 

What colour is Gyproc Wallboard TEN 12.5mm Plasterboard? 

The face colour of the product is a shade of ivory, while the reverse colour is a more standard brown. As a light and neutral colour, it can be painted over to create a different colour finish, depending on what you’re looking for. 


Can Gyproc Wallboard TEN 12.5mm Plasterboard be used in damp or humid conditions?

We’d advise that Gyproc TEN Wallboard 12.5mm plasterboard shouldn’t be used in any damp or humid conditions, as it’s not really designed to withstand moisture. If you do require a product that can, then we would recommend taking a look through our full range of moisture resistant plasterboard products, with standout options including Gyproc Moisture Resistant Board Tapered Edge

Data Sheet (151.21 kB)
Customer Questions
Can i fix two of these boards together?
Yes you can. You will need to make sure that the screws you use are long enough to get through both boards and into the substrate. Fixing one to the other will not be enough, they both need to be secured. Using two boards can help with sound performance  as the density is increased.
What is stud and track and why would I need to use it?
Stud and track is a metal partition system. Track is attached to the celling and floor then studs friction fit upright to become a frame for you to apply plasterboard to. This is mostly used in new build and industrial settings, where you cannot use a timber frame due to regulations.
Did you find what you were looking for?
More Information
Supplier Part NumberBG 11635/3
BrandBritish Gypsum
Edge TypeTapered
Size1200mm x 2400mm

Orders and Delivery

Free delivery if your order is over £300 ex VAT. Orders between £100 - £300 ex VAT will be subject to a delivery charge of £50 ex VAT. Please note, we are unable to accept orders less than £100 ex VAT

When ordering on line you can specify the date of delivery, however we would not be able to specify the time of delivery on that day.

• Please note that we have a number of large vehicles, including articulated vehicles that may be used for delivery. Please advise us in the comments on your order if access to the delivery address is limited.

• Due to insurance guidelines, delivery personnel are unable to enter private residences. Delivery will be as far as possible to the kerbside of the delivery address. The recipient of the products is responsible for any additional lifting once the delivery has been made. Please bear in mind that Insulation products can be bulky and / or heavy.

• The delivery driver will require a signature to confirm the goods have been received.

 † Unfortunately we, Insulation Express, cannot deliver to the Highlands & Islands of the UK. However we will be happy to deliver to a freight forwarding company on your behalf.


Returns and Refunds

In the unlikely event that you need to return an item, please contact our team on [email protected] within 14 days of accepting delivery of the item.

Restocking charges may apply. We will discuss this with you upon receipt of the cancellation request. Restocking charges will be applied where the products are no longer required AND NOT for goods returned because either defective or damaged.

We usually charge 30% of value (minimum £25.00).

Please note that we cannot accept returns on special orders. Special orders may consist of items sent via third party shipping companies or made to measure products. If you are unsure on whether or not your item is a special order, please contact us on [email protected] prior to placing the order.

Write Your Own Review
You're reviewing:Gyproc Ten Wallboard 12.5mm x 1200mm x 2400mm TE

Free delivery on orders over £300! Terms and Conditions apply

For all your roofing needs

Check out our new website!

 Buy Power tools online