Most homeowners are probably losing around 35% of the heat in their homes from the walls. There is a solution however, you can have your walls insulated meaning your home will become more energy efficient and help reduce your energy bills.

How Does Wall Insulation Work?

Cavity wall insulation works by injecting mineral fibre or using PIR/Phenolic/Mineral wool slabs. Solid wall insulation usually comes in the form of specially treated rigid boards or rolled material. Whichever material is used works to prevent the heat from escaping through the insulation. It traps the heat with tiny air pockets. This helps the warm air stay inside the home making your central heating system run more efficiently and thus reducing your energy bills.

 

What Type of Walls Do I Have?

The age of your house can give you a clue as to what type of walls you are likely to have. This is because most properties that were built before the 1930s are probably going to have solid walls. Between the 1930s and the 1980s, many of Britain’s homes were built with cavity walls. After the 1980s it is hi

Loft Insulation

ghly likely that you have cavity walls and they may already be insulated.

Another way to tell what type of wall you have is by looking at the brickwork. If the bricks appear long all the way down the wall, then you most probably have a cavity wall. If some of the bricks appear to be shorter in the middle of the wall, then it is probably solid. If while you’re looking you see small holes have been drilled into the wall at some time, this could mean you already have cavity wall insulation.

Finally, a third way of looking is to measure the thickness of your walls from outside a window or door. If your walls are 30cm or more then you could have cavity walls. If they are less than 30cm it is likely that you have solid walls.

 

Can You Add Insulation to Existing Walls?

Yes. You don’t need the property to be a new build. Insulation can be added to existing walls both externally and internally.

 

What Types of Wall Insulation Are There?

There are several types of wall insulation for both cavity and solid walls:

Cavity Wall

Cavity wall insulation is the easiest and cheapest way to insulate your walls. It can be done using three different types of insulation which are:

  • Blown Mineral Fibre/Mineral wool slabs This is made up of rock wool or glass wool which is spun and dried into fibres. The fibres are then treated with water repellent before being blown into the wall cavity.

 

  • PIR Boards- Polyisocyanurate, also referred to as PIR, is a thermoset plastic typically produced as a foam and used as rigid thermal insulation.
  • Phenolic boards - These boards are manufactured by a process in which a plastic foam forms an insulating core between two flexible tissue faced layers. It has a high closed cell content and fine cell structure. Rigid phenolic insulation is produced by mixing high solids and phenolic resin with a surface acting agent.

Solid Wall Insulation

You can still insulate your wall if it is solid. There is internal insulation, which means you insulate from the inside. It is a cheaper option, but it does mean that your rooms will become slightly smaller. External insulation is more expensive because it is more labour intensive.

If you insulate from the outside, then usually rigid boards or mineral fibre are fixed to the outside walls and then a layer of render or cladding is added. This may change the appearance of your exterior. If you live in a listed building or in a conservation area you can choose to have a tailor-made option for the rendering which matches other exteriors in the area.

If you decide to insulate from the inside, you can fit rigid boards onto the walls or fix a stud frame. If you do this, you can fill the gap between the frame and the wall with insulation.

 

How Much Money Can Wall Insulation Save?

According to the Energy Savings Trust if you have installed cavity wall insulation you should make the following savings per year:

  • Detached House - £250
  • Semi - £145
  • Mid Terrace - £95
  • Detached Bungalow - £100
  • Flat - £75

If you install insulation to solid walls you should make a yearly saving of:

  • Detached - £460
  • Semi - £270
  • Mid Terrace - £180
  • Detached Bungalow - £180
  • Flat - £150

 

Does Wall Insulation Need Planning Permission?

If the outside of your house is going to change dramatically, then you should talk to your local authority planning department because there might be restrictions. The same restrictions may apply if you own a listed building or live in a conservation area. If you don’t need planning permission, you still might need a building warrant. If you’re not sure then speak to someone at the building warrants office at your local council before you start the work.

 

Will I get a Guarantee?

If you use a company that is registered with the Solid Wall Installation Agency (SWIGA) you will get a 25- year guarantee against defective workmanship, materials or design faults.